1. Home
  2. Products
  3. Printing Machinery
  4. LJXCZYKM-D Series (Upper/Roller-to-roll Transfer)
LJXCZYKM-D Series (Upper/Roller-to-roll Transfer)
Quantity

LJXCZYKM-D Series (Upper/Roller-to-roll Transfer)

  • Product Description
Main featrues:

· Host and digital display control system, can store general orders, easy to operate.

· Electronic suspension, automatic reset, quick replacement.

• Each unit is equipped with an emergency stop switch and safe operation control.

·The gap adjustment adopts electric adjustment device, which is more convenient to operate.

· High-strength design of the whole machine, spray-type circulating lubrication system.

· International components such as electrical components, main bearings and start control components.

Technological parameter:
Project/Type ZYKM-D1022 ZYKM-D1225 ZYKM-D1229 ZYKM-D1425 ZYKM-D1429 ZYKM-D1625 ZYKM-D1629 ZYKM-D1632
Maximum speed (piece/min) 120 100 80 100 80 80 80 60
Paper feeding precision (mm) ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0
Maximum feed size (mm) 1000x2300 120x2500 1200x2900 1400x2500 1400x2900 1600x2500 1600x2900 1600x3300
Minimum feed size (mm) 300x600 350x600 350x600 400x600 400x600 450x600 450x600 450x600
Size of drawing paper (mm) 1300x2100 1500x2500 1500x2900 1700x2500 1700x2900 2000x2500 2000x2900 2000x3300
Maximum printing area (mm) 1000x2200 1200x2500 1200x2900 1400x2500 1400x2900 1600x2500 1600x2900 1600x3200
Printing set (mm) ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5
Thickness of standard printing plate (mm) 5mm 5mm 5mm 5mm 5mm 5mm 5mm 5mm
Minimum slotting interval (mm) Positive knife 160x160 160x160 160x160 160x160 160x160 160x160 160x160 180x180
Scalpel 270x65 270x65 270x65 270x65 270x65 270x65 270x65 290x70
Maximum groove depth (mm) 250 300 300 350 350 400 400 400
Slotting accuracy (mm) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5
Die cutting precision (mm) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5

Paper feeding unit:

· Roller leading edge paper feeding system, independent electronic shaft, extended paper feeding. Adopting international advanced technology, the system is stable and the paper feeding precision is high.

· Adsorption fan assists paper feeding, and the air volume is adjusted by frequency to ensure smooth feeding of curved cardboard. Suitable for 3, 5, 7 pressed corrugated board.

· The front bezel is manually adjusted, the dial is displayed, and it is directly convenient.

· The left and right side bezels are individually adjusted and displayed digitally.

· The tailgate is electrically adjusted, which is simple and convenient.

· Double conveyor roller mechanism, the first group of paper feed rollers adopt floating structure, and the pressure can be adjusted by spring force. The gap is manually adjusted, the sign is displayed, and the adjustment range is 1 to 12 mm.

• A brush at the entrance of the paper feed roller to remove impurities from the surface of the paperboard. A dust mechanism is installed between the two sets of paper feed rollers to absorb impurities on the surface of the paperboard to improve the printing quality.

Printing unit:

· Printing roller: steel cylinder, surface grinding, hard chrome plating. Diligent balance correction, the link is stable.

·The axial adjustment is manually adjusted, and the axial adjustment range is 10mm.

· Ratchet fixed roll shaft. The full version of the grooved loading and unloading printing plate, the foot switch electric control is reversed.

· The gap of the pressure roller is manually adjusted, and the label is displayed. The adjustment range is 4~12mm.

· Rubber roller ink system. The surface of the steel pipe is covered with wear-resistant rubber, and the medium and high special grinding. The gap is electrically adjusted, digital display, and the adjustment range is 0 to 6 mm. (Optional: Scraper and ink system)

Grinding anilox rolls: with a separate motor-driven idler to ensure ink ignorance during shutdown. Network cable: 160 to 500 optional. (Optional: ceramic anilox roller)

• The paper pull ring can be quickly moved and locked. (Optional: Full vacuum Fu-delivery system)

Slotting unit:

· Electric adjustment of the length, width, height and folding of the carton, digital display.

· The pressure of the pressure roller is manually adjusted, and the dial displays the adjustment value.

· Slotting knife thickness 7 mm, alloy steel material, zigzag heat treatment toothed grinding, sharp edge, high precision.

· The slotted phase is adjusted by computer electric numerical 360 degree.

· Add a hand hole mold base.

· The chain control switch is installed in the slotted part to realize emergency stop, stop or resume paper feeding.

Die cutting unit:

· Manually adjust the die cutting pressure gap.

· The rubber pad roller automatically traverses the swimming device.

· Imported quick-change rubber pad and wear resistance.

· Speed ​​difference compensation system ensures line speed consistency and guarantees accuracy.

· Pad grinding mechanism to extend the life of the pad and reduce consumption.

Welcome to send your message to us
*Email
*Content
Product Name
Your Name
Company
Tel/Fax.
Msn/ Skype